Nano-coating plant | Sand painting hung hardware appliances (certified) | spray processing provided by the Dongguan City, Sha Hong Hardware Appliance Co., Ltd.. Dongguan City, Sha Hong Hardware Appliance Co., Ltd. (www.dgshahong.com) is specialized in the "spray processing, electrical coating, metal spraying, shade spraying, roller coating, ceramic coating" of the enterprise, the company of "honesty, hard service" concept, to provide you with the highest quality products and services. Welcome to inquire! Contact: Mr. Sha. In the apparatus for the powder, the powder in a fluidized state, which is achieved by the action of compressed air, after which the powder with a high speed air stream flowing through the siphon effect, the formation of nano-spraying powder gas mixing plants, after venturi powder pump, lose powder tube, and finally to the gun. Transported to the powder spray gun is that it can control, specifically, the powder can be adjusted separately and air parameters, change the amount of powder and atomized powder state, which can achieve different film thickness stainless steel spray processing, to meet different product needs. For the powder device has sufficient capacity to lose even if the gun powder tube is 50 feet long, can also provide sufficient pressure and flow. (1) for the powder coating properties and can give full play to extend the service life of the coating, the surface to be painted first rigid surface pretreatment (2) when spraying, to be coated shall be fully grounded, to increase the powder coating spray the efficiency. (3) have a larger surface to be coated defects, should be coated with a conductive scraping putty coating to ensure smooth and smooth feel (4) after spraying object objects need to be heat-curing, curing conditions prevail in powder Product Specifications but must fully maintain its curing temperature and time, to avoid causing insufficient curing quality accident. (5) spray immediately after inspection, if found defective should be in time, if a defect is discovered after curing, the small range without affecting only partially, was painted surface decoration Teflon spray plants, available with color powder diluted in acetone after repair, if the range will affect the surface quality of spray processing, use sandpaper, then spray once or paint remover to remove the coating and re-dusting. (6) After recovering powder to be filtered to remove debris, by mixing the powder with the new role. (7) for the powder keg, powder room and recovery systems should avoid contamination of other powders of different colors, it must be purged every color change.